Lowther PM3 · 15 Ω (circa 1972)
Circa-1972 15 Ω Lowther PM3 horn driver. The original sheet gives 6 W capacity, 10 kg drive-unit weight and a 21000 gauss gap flux. The brochure specifies supply with the TP1 enclosure rather than as a separate drive unit.
Driver specifications
- Brand
- Lowther
- Driver type
- Full-range
- Size description
- Nominal diameter not stated on the reviewed drive-unit sheet
- Impedance
- 15 Ω
- Original publication
- Original Lowther drive-unit sheet, archived as estimated circa 1972, page 09; publication year is approximate
- Diaphragm
- Selected paper cone
- Voice coil material
- Aluminium
- Published power
- 6 W capacity in the historical brochure; test signal, duration and bandwidth are not specified.
- Published frequency range
- 20–22000 Hz. Published endpoints; no ±dB tolerance or exact horn specified.
- Gap flux density
- 21000 gauss. Published gap flux; not force factor BL.
- Net mass
- 10 kg. Published drive-unit weight; not moving mass Mms.
- Source checked
- 2026-10-09
Complete machining geometry and behind-flange mounting depth remain unestablished. Check the original drawing and the physical unit before construction.
Thiele/Small parameters
Historical T/S values remain unlisted until two credible sources corroborate this exact variant. Recones and modern replacements are not substituted.
Sources & availability
Original historical documentation at its external archive ↗
Historical circa-1972 configuration. Lowther remains active; current drivers and replacement assemblies are not assumed identical. The brochure specifies supply with the TP1 enclosure rather than as a separate drive unit.
Documentation remains at its original external source. Used-unit performance and condition require confirmation.