Lowther PM2 Mk II · 15 Ω (circa 1972)
Historical 15 Ω Lowther PM2 Mk II horn driver from an original brochure archived as circa 1972. The sheet gives 6 W capacity and a paper cone with aluminium voice coil. The separate PM6 Mk I silver-coil assembly and current Lowther products are not substituted.
Driver specifications
- Brand
- Lowther
- Driver type
- Full-range
- Size description
- Overall frame and nominal size not stated in the reviewed brochure
- Impedance
- 15 Ω
- Original publication
- Original Lowther Drive Units brochure sheet, archived as estimated circa 1972, page 09; date is approximate
- Diaphragm
- Paper cone
- Voice coil material
- Aluminium
- Published power
- Brochure states capacity 6 W; test signal, bandwidth and duration are not specified.
- Published frequency range
- 20–22000 Hz. Published response endpoints; no ±dB tolerance or exact horn specified.
- Gap flux density
- 23000 gauss. Historical magnetic-gap flux density; not force factor BL.
- Net mass
- 8 kg. Published driver weight; not moving mass Mms.
- Source checked
- 2026-10-09
Complete geometry for machining has not been established. Check the original drawing and the physical unit before construction.
Thiele/Small parameters
Historical T/S values remain unlisted until two credible sources corroborate the exact variant. No values are substituted from recones or modern replacements.
Sources & availability
Original historical documentation at its external archive ↗
Historical circa-1972 configuration. Lowther remains an active manufacturer; current drivers and replacement diaphragms are not assumed identical.
Documents remain at their external sources. These reference facts do not establish the condition or performance of a used unit.