◉SpeakerFoundryFREE DRIVER RESOURCES / 01
FREE SPEAKER DESIGN TOOL

Zobel Impedance Compensation Calculator

Calculate a speaker driver Zobel resistor and capacitor from DC resistance and inductance, with connection diagram and ideal resistor-loss estimate.

Open zobel compensation calculator →

Use Re and Le, not the nominal impedance

Start with the measured DC resistance in ohms and an inductance estimate in mH representative of the crossover region. Manufacturer Le values are a starting reference; real voice-coil behaviour is frequency dependent.

Connect the correction across the driver

The resistor and capacitor form one series pair. That pair connects in parallel across the driver terminals after its crossover. Use a non-polar capacitor and check the resistor’s dissipation separately.

Equations and limits

For the simplified driver Z = Re + jωLe, exact ideal cancellation uses Rz = Re and Cz = Le/Re², with Le in henries and Cz in farads. The total parallel impedance is then Re. The RL knee is Re/(2πLe).

The displayed resistor loss at frequency f and driver-terminal RMS voltage V is V²Rz/[Rz² + (1/(2πfCz))²]. This is a steady sine estimate, not a selected resistor rating.

This compensation does not remove the resonance peak, reproduce semi-inductance, predict acoustic response or account for heating. Re-measure the assembled network’s impedance and evaluate the crossover with the corrected load.

Technical reference: Elliott Sound Products: impedance compensation.

Continue your design

Complete crossover network · Measured-data workspace · All tool guides

Add it to a complete crossover

In Complete network, enable Zobel impedance compensation independently for the tweeter or woofer and enter that driver’s Re and Le. The tool includes the series R/C shunt in the solved circuit and shows it in the full wiring preview. With the option enabled, the branch uses the entered RL driver model; with it off, the original constant-load model remains.