◉SpeakerFoundryFREE DRIVER RESOURCES / 01
FREE SPEAKER DESIGN TOOL

Speaker Wiring & Impedance Calculator

Plan identical loudspeaker drivers in series and parallel, including dual voice coils, with nominal amplifier load, wiring diagram and ideal power sharing.

Open speaker wiring calculator →

Start with one amplifier channel

Enter the nominal impedance of each voice coil. Use identical drivers and equal series strings. For dual-voice-coil drivers, choose whether both identical coils inside each driver are in series or parallel; all drivers use that same arrangement.

Connect the strings

In series, amplifier + connects to driver 1 +; driver 1 − connects to driver 2 +; the last driver − returns to amplifier −. Parallel strings share amplifier + at their first positive terminal and amplifier − at their last negative terminal. Keep polarity consistent.

Nominal impedance and power

Two identical voice coils in series give 2Zcoil; in parallel they give Zcoil/2. With S drivers in each string and P equal parallel strings, total nominal impedance is Zdriver × S/P. Four 8 Ω single-coil drivers arranged as two series pairs in parallel give 8 Ω.

Under a purely resistive model, total power at RMS voltage V is V²/Ztotal, divided equally between identical drivers. This is not an amplifier output or driver power rating.

Check the amplifier and measured load

A nominal estimate can miss lower impedance and reactive phase in a real speaker. Crossover parts and voice-coil temperature also change the load. Consult the amplifier specification and measure the completed system. Never connect outputs from separate amplifier channels together.

Continue your design

Complete crossover network · Measured-data workspace · All tool guides