Measured crossover design and optimizer.
Use your own driver measurements to build and simulate a passive crossover. The measured-data workspace combines acoustic response, driver impedance and ordered series/shunt components in a browser-based project.
Prepare one response for each driver
Import frequency in Hz, level in dB and optional phase in degrees as FRD, TXT or CSV. Impedance files use frequency in Hz, magnitude in Ω and optional phase in degrees as ZMA, TXT or CSV. Use a decimal point and consistent columns. Each measurement accepts up to 50,000 rows and 2 MB.
Open REW sessions in REW first and export the chosen response as text. SpeakerFoundry does not decode .mdat sessions. The SpeakerFoundry REW text-import instructions explain the path into the measurement page and the direct transfer into this workspace.
Keep a common measurement reference
A phase column does not prove that independently captured measurements share a timing reference. Confirm consistent microphone position, installed baffle, drive level and timing before enabling a coherent sum. Magnitude-only data never gains invented phase.
Without ZMA, the simulation uses your stated constant resistance and flags that approximation. Missing impedance phase is also flagged. Responses are interpolated on a logarithmic frequency axis within their shared coverage; the tool does not extrapolate outside it.
Build the circuit in signal order
Add up to four driver branches, with up to twelve R, L or C components in each. Series components move along the signal path; shunt components connect the current node to the amplifier return. Enter inductor DCR and capacitor ESR where known.
Choose a first through fourth order starter or enter your own ladder. Added delay and polarity are relative to the phase already in the response file. Use delay carefully to avoid counting an existing time offset twice.
Optimize, review and save
The automatic optimizer searches unlocked component values toward your level and slope target over a selected frequency band. It retains topology, polarity, delay and losses. Review the candidate, apply it to inspect the response, or undo it.
This bounded local search does not guarantee the best circuit. Check sampled impedance, practical component values and the completed loudspeaker. Off-axis response, power handling and arbitrary bridge circuits are outside the model.
Save a named project on this device or download JSON. Measurements, reference confirmation, components, losses, locks and optimizer setup are retained; temporary candidates are not. Device saves can be lost when browser site data is cleared. Your files are not uploaded to the public driver library.
Continue your design
Open the measured crossover workspace →
All SpeakerFoundry tools are free to access. Read the sources, rights and disclaimer.