◉SpeakerFoundryFREE DRIVER RESOURCES / 01
FREE SPEAKER DESIGN TOOL

Series & Parallel Component Calculator

Combine crossover capacitors, inductors or resistors in series or parallel, and find ideal one- or two-part E12/E24 combinations for a target value.

Open component combinations calculator →

Parts you already have

Select capacitor, inductor or resistor, choose a connection, then enter values in µF, mH or Ω. Enter every value in the same unit, using decimal points. The diagram shows which nodes are connected.

Series and parallel rules

Resistors and uncoupled ideal inductors add in series; their parallel equivalent is 1/Σ(1/value). Capacitors add in parallel; their series equivalent is 1/Σ(1/value). For example, parallel 4.7 µF and 2.2 µF capacitors give 6.90 µF.

Find a target combination

The target search checks single values and two-part series/parallel pairs from E12 or E24, within 0.01×–100× your target. It ranks ideal percentage error, then favours fewer parts and balanced values on ties. These numbers do not guarantee that a supplier stocks suitable components.

Check the real assembly

Inductor mutual coupling and winding resistance are omitted. Capacitor ESR, leakage and voltage sharing are omitted. Check individual resistor dissipation. Component tolerance can overwhelm a small ideal error: measure the assembled value and recalculate the network with actual parts.

Preferred-number reference: Vishay standard decade value tables.

Continue your design

Complete crossover network · Measured-data workspace · All tool guides