SpeakerFoundry
VINTAGE DRIVER REFERENCE

Tannoy HPD 315A

Original HPD 315A coaxial integrated drive system with an 8-ohm nominal impedance, separate LF and HF coils and its original crossover network. Sub-baffle dimensions are identified separately from front-baffle geometry; current stock and a complete CAD model are not established.

PDF / documentation ↗

Driver specifications

Brand
Tannoy
Type
Coaxial
Collection
Vintage reference
Nominal size
12 inches / 315 mm — original nominal designation
Nominal impedance
8 Ω
Diaphragm material
See source
Overall diameter
Not established in reviewed drawing
Baffle cutout
See original recess and sub-baffle drawings below
Mounting depth behind flange
Not established in reviewed drawing
Source checked
2026-10-16

Dimensions below distinguish the original sub-baffle aperture from the front recess. Check the exact drawing and your physical driver before machining.

Used in loudspeaker

Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.

No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.

These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.

Construction, mounting & original reference

Open a section for documented details and its original source.

Original integrated drive system
Exact model
HPD 315A; 8 Ω nominal
Nominal designation
315 mm (12 inches), as printed; not overall frame diameter
LF section
Girdacoustic reinforcing ribs on the LF cone; 50 mm copper-wire voice coil
HF section
Horn-loaded compression driver; 50 mm duralumin diaphragm and 50 mm aluminium-wire voice coil

These details describe the original integrated assembly; restored or reconed units may differ.

Original technical reference ↗

Original rating and crossover conditions
Power handling
60 W continuous programme in the original table; no modern AES rating inferred
Sensitivity reference
5 W input at 400 Hz produces 96 dB at 1 m in an anechoic environment
Original crossover
1000 Hz at 12 dB/octave, with the original network
HF horn cutoff
500 Hz horn cutoff; this is not the recommended crossover frequency
Shipping weight
8 kg; not net driver mass or moving mass

Sensitivity is preserved in its original input-power form; it is not relabelled as a 1 W or 2.83 V specification.

Original technical reference ↗

Recess mounting and sub-baffle
Original enclosure references
Cheviot / Devon equivalents in this manual
Sub-baffle opening
285 mm circular opening in Figure 7; not the complete front-baffle recess
Fixing layout
305 mm pitch circle; four illustrated fixing positions
Sub-baffle hole diameters
Figure 7 lists 8 mm for the 385, 8 mm in Cheviot / 6 mm in Devon for the 315, and 6 mm for the 295
Fastener type
¼ BSW tee nuts for the 385; 2 BA for the 315 and 295

The sub-baffle aperture, front recess and nominal size are different dimensions. Confirm the original drawing, unit and fastener before machining. Overall frame diameter and depth remain unknown here.

Original technical reference ↗

Original network controls
Energy
Five positions; adjusts the HF section over approximately 1–20 kHz
Roll-off
Acts above approximately 5 kHz
Initial reference
Both controls at the original Level position

These are controls on the original network, not interchangeable settings for a newly designed crossover.

Original technical reference ↗

Thiele/Small parameters

Historical T/S values, including the original tabulated resonance, remain withheld pending independent exact-variant corroboration. Published system ratings are kept with their original conditions.

CAD origin and access

No verified CAD resource

Original HPD 315A coaxial integrated drive system with an 8-ohm nominal impedance, separate LF and HF coils and its original crossover network. Sub-baffle dimensions are identified separately from front-baffle geometry; current stock and a complete CAD model are not established.

No verified CAD link is offered for this record.

Technical sources

View original technical reference ↗

Historical HPD integrated drive system. Used stock, original parts, reconing and condition require individual confirmation.

Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.

Search Tannoy drivers →