Tang Band W8-670T
Tang Band W8-670T subwoofer reference, with manufacturer specifications and an official product photograph. Paper diaphragm and ferrite motor.
Manufacturer product photographDriver specifications
- Type
- Subwoofer
- Nominal size
- 8" nominal manufacturer designation
- Nominal impedance
- 4 Ω
- Diaphragm material
- Paper
- Sensitivity
- 86 dB; 1 W / 1 m
- Rated power input
- 80 W; manufacturer designation
- Maximum power input
- 160 W; distinct from rated power
- Response endpoints
- 40–1000 Hz; no tolerance specified
- Mounting dimensions
- Consult the complete manufacturer drawing
- Source checked
- 2026-10-16
Manufacturer rated power input; test standard, band, filter and duration are not specified in the table. Published frequency-response endpoints; no tolerance specified. These endpoints are not recommended crossover frequencies.
Construction, mounting & original reference
Open a section for documented details and its original source.
Construction and rated performance
- Nominal size
- 8"
- Diaphragm
- Paper
- Surround
- Rubber
- Magnet
- Ferrite
- Sensitivity
- 86 dB at 1 W / 1 m
- Rated power input
- 80 W
- Maximum power input
- 160 W; distinct from rated power
- Voice-coil diameter
- 38.5 mm
- Published response range
- 40~1K Hz
- Air gap height
- 8 mm
- Ferrofluid
- No
- Published Zo
- 80 Ω
Published power and frequency limits retain their source conditions. They are not a recommended filter or safe operating-level prescription.
Tang Band official product page ↗ · Current product table and linked manufacturer PDF
Measurement conditions and fit
- Sensitivity reference
- 1 W / 1 m; not 2.83 V / 1 m
- Levc
- Measurement frequency is not specified
- Sd conversion
- Manufacturer m² converted to cm²
- Cms conversion
- Manufacturer µm/N converted to mm/N
- Mounting dimensions
- Consult the complete original drawing; frame diameter, baffle opening and behind-flange clearance have not been separately verified
- Current catalogue status
- Product page available at the check date; live stock is not asserted
Verify the current model revision and mounting clearances before machining.
Tang Band official product page ↗ · Current product table and linked manufacturer PDF
Source discrepancy: Mms / moving mass
- Product page
- 49.98 g
- Other official source
- 49.89 g in the linked manufacturer PDF
- Library treatment
- Mms / moving mass withheld pending manufacturer clarification
The original PDF table was visually reviewed; no revision precedence is stated, so moving mass remains unfilled.
Tang Band official product page ↗ · Current product table and linked manufacturer PDF
Thiele/Small parameters
Official product-table values. Sd is converted from m² to cm² and Cms from µm/N to mm/N. Le is the published Levc; measurement frequency is not stated. Unlisted fields stay unknown. Unresolved source discrepancies are withheld and documented below; no alternative value is substituted.
- Fs · resonance
- 40 Hz
- Qts · total Q
- 0.45
- Qes · electrical Q
- 0.49
- Qms · mechanical Q
- 5.87
- Vas · equivalent volume
- 23.27 L
- Re · DC resistance
- 3.6 Ω
- Levc · inductance
- 0.72 mH
- Sd · piston area
- 220 cm²
- BL · force factor
- 9.43 N/A
- Cms · compliance
- 0.33865 mm/N
- Xmax · published excursion
- 7.85 mm
Only populated, resolved source fields are listed. Published X-max value; excursion convention is not independently redefined. Confirm the manufacturer’s convention before estimating displacement. These are reference specifications, not measurements of your individual driver.
Sources & availability
Tang Band official product page ↗ · Manufacturer PDF datasheet ↗
Listed in Tang Band’s current catalogue. Confirm stock, production revision and complete mounting drawing with the manufacturer.