Tang Band W4-2089
Tang Band W4-2089 woofer reference, with manufacturer specifications and an official product photograph. PP+Mica diaphragm and ferrite motor.
Manufacturer product photographDriver specifications
- Type
- Woofer
- Nominal size
- 4" nominal manufacturer designation
- Nominal impedance
- 4 Ω
- Diaphragm material
- PP+Mica
- Sensitivity
- 79 dB; 1 W / 1 m
- Rated power input
- 40 W; manufacturer designation
- Maximum power input
- 80 W; distinct from rated power
- Response endpoints
- 35–800 Hz; no tolerance specified
- Mounting dimensions
- Consult the complete manufacturer drawing
- Source checked
- 2026-10-16
Manufacturer rated power input; test standard, band, filter and duration are not specified in the table. Published frequency-response endpoints; no tolerance specified. These endpoints are not recommended crossover frequencies.
Construction, mounting & original reference
Open a section for documented details and its original source.
Construction and rated performance
- Nominal size
- 4"
- Diaphragm
- PP+Mica
- Surround
- Santoprene
- Magnet
- Ferrite
- Sensitivity
- 79 dB at 1 W / 1 m
- Rated power input
- 40 W
- Maximum power input
- 80 W; distinct from rated power
- Voice-coil diameter
- 38.5 mm
- Published response range
- 35-800 Hz
- Air gap height
- 6 mm
- Ferrofluid
- No
- Published Zo
- 50 Ω
Published power and frequency limits retain their source conditions. They are not a recommended filter or safe operating-level prescription.
Tang Band official product page ↗ · Current product table and linked manufacturer PDF
Measurement conditions and fit
- Sensitivity reference
- 1 W / 1 m; not 2.83 V / 1 m
- Levc
- Measurement frequency is not specified
- Sd conversion
- Manufacturer m² converted to cm²
- Cms conversion
- Manufacturer µm/N converted to mm/N
- Mounting dimensions
- Consult the complete original drawing; frame diameter, baffle opening and behind-flange clearance have not been separately verified
- Current catalogue status
- Product page available at the check date; live stock is not asserted
Verify the current model revision and mounting clearances before machining.
Tang Band official product page ↗ · Current product table and linked manufacturer PDF
Thiele/Small parameters
Official product-table values. Sd is converted from m² to cm² and Cms from µm/N to mm/N. Le is the published Levc; measurement frequency is not stated. Unlisted fields stay unknown.
- Fs · resonance
- 35 Hz
- Qts · total Q
- 0.42
- Qes · electrical Q
- 0.46
- Qms · mechanical Q
- 4.73
- Vas · equivalent volume
- 3.39 L
- Re · DC resistance
- 3.6 Ω
- Levc · inductance
- 0.198 mH
- Sd · piston area
- 75 cm²
- BL · force factor
- 8.69 N/A
- Mms · moving mass
- 39.9 g
- Cms · compliance
- 0.42424 mm/N
- Xmax · published excursion
- 8 mm
Only populated, resolved source fields are listed. Published X-max value; excursion convention is not independently redefined. Confirm the manufacturer’s convention before estimating displacement. These are reference specifications, not measurements of your individual driver.
Sources & availability
Tang Band official product page ↗ · Manufacturer PDF datasheet ↗
Listed in Tang Band’s current catalogue. Confirm stock, production revision and complete mounting drawing with the manufacturer.