SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Tang Band W3-2141

Tang Band W3-2141 full-range reference, with manufacturer specifications and an official product photograph. Paper diaphragm and ferrite motor.

PDF datasheet ↗

Driver specifications

Type
Full-range
Nominal size
3" nominal manufacturer designation
Nominal impedance
8 Ω
Diaphragm material
Bamboo fibre paper
Sensitivity
87 dB; 1 W / 1 m
Rated power input
12 W; manufacturer designation
Maximum power input
25 W; distinct from rated power
Response endpoints
75–20000 Hz; no tolerance specified
Mounting dimensions
Consult the complete manufacturer drawing
Source checked
2026-10-16

Manufacturer rated power input; test standard, band, filter and duration are not specified in the table. Published frequency-response endpoints; no tolerance specified. These endpoints are not recommended crossover frequencies.

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction and rated performance
Nominal size
3"
Diaphragm
Paper
Surround
Structured Santoprene
Magnet
Ferrite
Sensitivity
87 dB at 1 W / 1 m
Rated power input
12 W
Maximum power input
25 W; distinct from rated power
Voice-coil diameter
20.4 mm
Published response range
75-20K Hz
Air gap height
8 mm
Ferrofluid
No
Published Zo
40 Ω

Published power and frequency limits retain their source conditions. They are not a recommended filter or safe operating-level prescription.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Measurement conditions and fit
Sensitivity reference
1 W / 1 m; not 2.83 V / 1 m
Levc
Measurement frequency is not specified
Sd conversion
Manufacturer m² converted to cm²
Cms conversion
Manufacturer µm/N converted to mm/N
Mounting dimensions
Consult the complete original drawing; frame diameter, baffle opening and behind-flange clearance have not been separately verified
Current catalogue status
Product page available at the check date; live stock is not asserted

Verify the current model revision and mounting clearances before machining.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Thiele/Small parameters

Official product-table values. Sd is converted from m² to cm² and Cms from µm/N to mm/N. Le is the published Levc; measurement frequency is not stated. Unlisted fields stay unknown.

Fs · resonance
75 Hz
Qts · total Q
0.39
Qes · electrical Q
0.46
Qms · mechanical Q
2.51
Vas · equivalent volume
3.3 L
Re · DC resistance
6.5 Ω
Levc · inductance
0.02 mH
Sd · piston area
32 cm²
BL · force factor
3.64 N/A
Mms · moving mass
1.996 g
Cms · compliance
2.269 mm/N
Xmax · published excursion
1.6 mm

Only populated, resolved source fields are listed. Published X-max value; excursion convention is not independently redefined. Confirm the manufacturer’s convention before estimating displacement. These are reference specifications, not measurements of your individual driver.

Sources & availability

Tang Band official product page ↗ · Manufacturer PDF datasheet ↗

Listed in Tang Band’s current catalogue. Confirm stock, production revision and complete mounting drawing with the manufacturer.

Search Tang Band drivers →