SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Tang Band W3-1876S

Tang Band W3-1876S subwoofer reference, with manufacturer specifications and an official product photograph. PP diaphragm and neodymium motor.

PDF datasheet ↗

Driver specifications

Type
Subwoofer
Nominal size
3" nominal manufacturer designation
Nominal impedance
4 Ω
Diaphragm material
PP
Sensitivity
76 dB; 1 W / 1 m
Rated power input
15 W; manufacturer designation
Maximum power input
30 W; distinct from rated power
Response endpoints
55–2000 Hz; no tolerance specified
Mounting dimensions
Consult the complete manufacturer drawing
Source checked
2026-10-16

Manufacturer rated power input; test standard, band, filter and duration are not specified in the table. Published frequency-response endpoints; no tolerance specified. These endpoints are not recommended crossover frequencies.

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction and rated performance
Nominal size
3"
Diaphragm
PP
Surround
Santoprene
Magnet
Neodymium
Sensitivity
76 dB at 1 W / 1 m
Rated power input
15 W
Maximum power input
30 W; distinct from rated power
Voice-coil diameter
20.4 mm
Published response range
55-2K Hz
Air gap height
4.0 mm
Ferrofluid
NO
Published Zo
75 Ω

Published power and frequency limits retain their source conditions. They are not a recommended filter or safe operating-level prescription.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Measurement conditions and fit
Sensitivity reference
1 W / 1 m; not 2.83 V / 1 m
Levc
Measurement frequency is not specified
Sd conversion
Manufacturer m² converted to cm²
Cms conversion
Manufacturer µm/N converted to mm/N
Mounting dimensions
Consult the complete original drawing; frame diameter, baffle opening and behind-flange clearance have not been separately verified
Current catalogue status
Product page available at the check date; live stock is not asserted

Verify the current model revision and mounting clearances before machining.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Source discrepancy: Xmax
Product page
5 mm in technical table
Other official source
4 mm in product description
Library treatment
Xmax withheld pending manufacturer clarification

Two parts of the official current product page disagree. Neither number is silently substituted for the other.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Thiele/Small parameters

Official product-table values. Sd is converted from m² to cm² and Cms from µm/N to mm/N. Le is the published Levc; measurement frequency is not stated. Unlisted fields stay unknown. Unresolved source discrepancies are withheld and documented below; no alternative value is substituted.

Fs · resonance
55 Hz
Qts · total Q
0.43
Qes · electrical Q
0.5
Qms · mechanical Q
3.17
Vas · equivalent volume
0.88 L
Re · DC resistance
3.6 Ω
Levc · inductance
0.19 mH
Sd · piston area
27 cm²
BL · force factor
5.28 N/A
Mms · moving mass
9.98 g
Cms · compliance
0.73767 mm/N

Only populated, resolved source fields are listed. Published X-max value; excursion convention is not independently redefined. Confirm the manufacturer’s convention before estimating displacement. These are reference specifications, not measurements of your individual driver.

Sources & availability

Tang Band official product page ↗ · Manufacturer PDF datasheet ↗

Listed in Tang Band’s current catalogue. Confirm stock, production revision and complete mounting drawing with the manufacturer.

Search Tang Band drivers →