SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Tang Band W2-1625SA

Tang Band W2-1625SA subwoofer reference, with manufacturer specifications and an official product photograph. PP diaphragm and neodymium motor.

PDF datasheet ↗

Driver specifications

Type
Subwoofer
Nominal size
2" nominal manufacturer designation
Nominal impedance
8 Ω
Diaphragm material
PP
Sensitivity
80 dB; 1 W / 1 m
Rated power input
20 W; manufacturer designation
Maximum power input
40 W; distinct from rated power
Response endpoints
90–500 Hz; no tolerance specified
Mounting dimensions
Consult the complete manufacturer drawing
Source checked
2026-10-16

Manufacturer rated power input; test standard, band, filter and duration are not specified in the table. Published frequency-response endpoints; no tolerance specified. These endpoints are not recommended crossover frequencies.

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction and rated performance
Nominal size
2"
Diaphragm
PP
Surround
Santoprene
Magnet
Neodymium
Sensitivity
80 dB at 1 W / 1 m
Rated power input
20 W
Maximum power input
40 W; distinct from rated power
Voice-coil diameter
25.4 mm
Published response range
90-500 Hz
Air gap height
4 mm
Ferrofluid
No
Published Zo
86 Ω

Published power and frequency limits retain their source conditions. They are not a recommended filter or safe operating-level prescription.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Measurement conditions and fit
Sensitivity reference
1 W / 1 m; not 2.83 V / 1 m
Levc
Measurement frequency is not specified
Sd conversion
Manufacturer m² converted to cm²
Cms conversion
Manufacturer µm/N converted to mm/N
Mounting dimensions
Consult the complete original drawing; frame diameter, baffle opening and behind-flange clearance have not been separately verified
Current catalogue status
Product page available at the check date; live stock is not asserted

Verify the current model revision and mounting clearances before machining.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Thiele/Small parameters

Official product-table values. Sd is converted from m² to cm² and Cms from µm/N to mm/N. Le is the published Levc; measurement frequency is not stated. Unlisted fields stay unknown.

Fs · resonance
90 Hz
Qts · total Q
0.31
Qes · electrical Q
0.33
Qms · mechanical Q
3.94
Vas · equivalent volume
0.31 L
Re · DC resistance
6.6 Ω
Levc · inductance
0.215 mH
Sd · piston area
15 cm²
BL · force factor
5.16 N/A
Mms · moving mass
2.3 g
Cms · compliance
1.295 mm/N
Xmax · published excursion
2 mm

Only populated, resolved source fields are listed. Published X-max value; excursion convention is not independently redefined. Confirm the manufacturer’s convention before estimating displacement. These are reference specifications, not measurements of your individual driver.

Sources & availability

Tang Band official product page ↗ · Manufacturer PDF datasheet ↗

Listed in Tang Band’s current catalogue. Confirm stock, production revision and complete mounting drawing with the manufacturer.

Search Tang Band drivers →