SpeakerFoundry
MANUFACTURER CATALOGUE REFERENCE

Tang Band 13-1761S

Tang Band 13-1761S tweeter reference, with manufacturer specifications and an official product photograph. Fabric diaphragm and neodymium motor.

PDF datasheet ↗

Driver specifications

Type
Tweeter
Nominal size
13 mm nominal manufacturer designation
Nominal impedance
8 Ω
Diaphragm material
Fabric
Sensitivity
88 dB; 1 W / 1 m
Rated power input
3.5 W; manufacturer designation
Maximum power input
50 W; distinct from rated power
Response endpoints
4000–20000 Hz; no tolerance specified
Mounting dimensions
Consult the complete manufacturer drawing
Source checked
2026-10-16

Manufacturer rated power input; test standard, band, filter and duration are not specified in the table. Published frequency-response endpoints; no tolerance specified. These endpoints are not recommended crossover frequencies.

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction and rated performance
Nominal size
13 mm
Diaphragm
Fabric
Surround
Not listed
Magnet
Neodymium
Sensitivity
88 dB at 1 W / 1 m
Rated power input
3.5 W
Maximum power input
50 W; distinct from rated power
Voice-coil diameter
13.28 mm
Published response range
4K~20K Hz
Air gap height
1.5 mm
Ferrofluid
Yes

Published power and frequency limits retain their source conditions. They are not a recommended filter or safe operating-level prescription.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Measurement conditions and fit
Sensitivity reference
1 W / 1 m; not 2.83 V / 1 m
Levc
Measurement frequency is not specified
Sd conversion
Manufacturer m² converted to cm²
Cms conversion
Manufacturer µm/N converted to mm/N
Mounting dimensions
Consult the complete original drawing; frame diameter, baffle opening and behind-flange clearance have not been separately verified
Current catalogue status
Product page available at the check date; live stock is not asserted

Verify the current model revision and mounting clearances before machining.

Tang Band official product page ↗ · Current product table and linked manufacturer PDF

Thiele/Small parameters

Official product-table values. Sd is converted from m² to cm² and Cms from µm/N to mm/N. Le is the published Levc; measurement frequency is not stated. Unlisted fields stay unknown.

Fs · resonance
4000 Hz
Re · DC resistance
7 Ω

Only populated, resolved source fields are listed. Published X-max value; excursion convention is not independently redefined. Confirm the manufacturer’s convention before estimating displacement. These are reference specifications, not measurements of your individual driver.

Sources & availability

Tang Band official product page ↗ · Manufacturer PDF datasheet ↗

Listed in Tang Band’s current catalogue. Confirm stock, production revision and complete mounting drawing with the manufacturer.

Search Tang Band drivers →