◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak R2004/602000

Archived Illuminator ring-dome tweeter with a central phase plug, protective grille and 55.3 mm faceplate. The sheet specifies a 19 mm voice coil but gives inconsistent nominal-size descriptions. Nominal size is withheld rather than treating this variant as an R3004.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Illuminator
Type
Archived tweeter
Nominal dome size
Ring dome; nominal size requires clarification
Nominal impedance
4 Ω
Diaphragm
Ring dome; material not specified in this sheet
Published sensitivity
86 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
50 W in the 100-hour RMS noise test (IEC 18.4); 180 W long-term maximum (IEC 18.2), using a second-order Butterworth high-pass at 3 kHz as printed on the sheet.
Voice-coil diameter
19 mm
Overall diameter
55.3 mm
Complete driver mass
0.1 kg
Recommended operating range
3000–30000 Hz. Manufacturer recommended operating range, not a stated flatness tolerance.
Original document
Manufacturer archived datasheet, updated 2021-01-07, page 1
Source checked
2026-10-11

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →