◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak D3806/820000

Archived Classic 38 mm textile-dome tweeter intended for upper-midrange use, with an SD-2 motor and a 125 mm aluminium faceplate. The sheet recommends operation from 2 kHz but uses a 1 kHz high-pass for its quoted noise-power test; those conditions are kept distinct.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived tweeter
Nominal dome size
38 mm dome
Nominal impedance
6 Ω
Diaphragm
Textile dome
Published sensitivity
89 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
100 W in the 100-hour RMS noise test (IEC 18.4), using a second-order Butterworth high-pass at 1 kHz as printed on the sheet.
Voice-coil diameter
38 mm
Overall diameter
125 mm
Complete driver mass
1.1 kg
Recommended operating range
2000–20000 Hz. Manufacturer recommended operating range, not a stated flatness tolerance.
Original document
Manufacturer archived datasheet, updated 2020-05-18, page 1
Source checked
2026-10-11

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →