◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak D3004/664000

Archived Illuminator beryllium-dome tweeter with an AirCirc motor using six neodymium magnets, protective grille and 104 mm faceplate. The original operating-range and power-test conditions are preserved for this exact 664000 variant.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Illuminator
Type
Archived tweeter
Nominal dome size
26 mm dome
Nominal impedance
4 Ω
Diaphragm
Beryllium diaphragm (manufacturer states 99% pure Be)
Published sensitivity
91.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
90 W in the 100-hour RMS noise test (IEC 18.4); 150 W long-term maximum (IEC 18.2), using a second-order Butterworth high-pass at 2.5 kHz as printed on the sheet.
Voice-coil diameter
26 mm
Overall diameter
104 mm
Complete driver mass
0.3 kg
Magnet material
Neodymium
Recommended operating range
2500–40000 Hz. Manufacturer recommended operating range, not a stated flatness tolerance.
Original document
Manufacturer archived datasheet, updated 2021-01-07, page 1
Source checked
2026-10-11

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →