◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak D3004/662001

Archived Illuminator textile-dome tweeter with an AirCirc motor using six neodymium magnets and a rubber front for diffraction damping. Its original drawing explicitly labels an 82.7 mm cutout. The silver-faceplate 662001 reference is retained separately from the 662000.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Illuminator
Type
Archived tweeter
Nominal dome size
1-inch nominal textile dome
Nominal impedance
4 Ω
Diaphragm
Textile dome
Published sensitivity
91.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
90 W in the 100-hour RMS noise test (IEC 17.1); 150 W long-term maximum (IEC 17.3). The sheet refers to IEC 60268-5 third edition and specifies a second-order Butterworth high-pass at 2.5 kHz. Section references are preserved as printed.
Voice-coil diameter
26 mm
Overall diameter
104.25 mm
Drawing cutout diameter
82.7 mm; see tolerance notes
Complete driver mass
0.3 kg
Magnet material
Neodymium
Original document
Manufacturer archived datasheet, updated 2011-02-22, page 1
Source checked
2026-10-11

Original drawing: overall diameter 104.25 mm (+0.3 mm), explicitly labelled cutout 82.7 mm (±0.3 mm). Behind-flange mounting depth remains unlisted; use the original drawing and actual driver before machining.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →