◉SpeakerFoundryFREE DRIVER RESOURCES / 01
MANUFACTURER CATALOGUE REFERENCE

Scan-Speak D2905/950000

Scan-Speak D2905/950000 tweeter reference with official product photos, checked specifications and external manufacturer CAD/PDF access.

CAD model ↗PDF ↗

Driver photographs

Driver specifications

Brand
Scan-Speak
Type
Tweeter
Collection
Manufacturer catalogue
Nominal size
28 mm
Nominal impedance
6 Ω
Diaphragm material
See source
Overall diameter
Awaiting source review
Baffle cutout
Awaiting source review
Mounting depth behind flange
Awaiting source review
Resonance (Fs)
550 Hz
Total Q (Qts)
0.38
Equivalent volume (Vas)
0.02 litres
Source checked
2026-10-10
Product family
Classic
Published sensitivity
90 dB. Manufacturer product-table value. Reference voltage and measurement distance are not established by this table; check the linked datasheet.

Nominal size is not a recommended baffle cutout. Dimensions not separately reviewed remain unknown; check the original drawing before machining.

Thiele/Small parameters

Fs, Re, Qt (total Q), Vas, Sd and BL are transcribed only when numeric values appear in the exact manufacturer product table. Additional parameters and installation dimensions await a separate datasheet/drawing review. Published sensitivity conditions are not assumed; these are catalogue reference values, not measurements of an individual driver.

Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.

Fs · resonance
550 Hz
Qts · total Q
0.38
Qes · electrical Q
Awaiting source review
Qms · mechanical Q
Awaiting source review
Vas · equivalent volume
0.02 L
Re · DC resistance
4.7 Ω
Le · inductance
Awaiting source review
Sd · piston area
8.5 cm²
BL · force factor
3.5 N/A
Mms · moving mass
Awaiting source review
Cms · compliance
Awaiting source review
Rms · mechanical resistance
Awaiting source review
Xmax · linear excursion
Awaiting source review
Vd · displacement
Awaiting source review

Check the source revision and measurement conditions before design. Open original parameter source ↗

Manufacturer resources

Official Scan-Speak catalogue reference for this exact variant. Product photographs are credited to Scan-Speak A/S. Manufacturer CAD archives and datasheets open externally.

Official Scan-Speak product page ↗

Listed in the official Scan-Speak catalogue on 10 October 2026. Confirm exact revision, stock and lead time with the supplier.

Search Scan-Speak drivers →