◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak D2904/9400SE

Discontinued Classic soft-dome tweeter with ferrofluid, a metal faceplate and heavy-duty terminals. The archived 9400SE sheet specifies a 28 mm voice coil and a 104.3 mm overall faceplate diameter. Ratings are retained for this exact suffix.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived tweeter
Nominal dome size
1-inch nominal tweeter
Nominal impedance
4 Ω
Diaphragm
Soft dome; material not specified in this sheet
Published sensitivity
91 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
150 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). This archived sheet does not state the test high-pass or bandwidth; this is not an unfiltered tweeter power limit.
Voice-coil diameter
28 mm
Overall diameter
104.3 mm
Original document
Manufacturer archived two-page datasheet, copyright 2009; marked discontinued
Source checked
2026-10-10

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →