Scan-Speak D2904/710001
Discontinued Revelator soft-dome tweeter with an SD-2 neodymium motor, aluminium rear chamber and machined aluminium faceplate. This 710001 revision has its own original datasheet and is kept separate from the 710000 and later production variants.
Archived product viewDriver specifications
- Brand
- Scan-Speak
- Family
- Revelator
- Type
- Archived tweeter
- Nominal dome size
- 1-inch nominal tweeter
- Nominal impedance
- 4 Ω
- Diaphragm
- Soft dome; material not specified in this sheet
- Published sensitivity
- 94.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
- Published power test
- 160 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). This archived sheet does not state the test high-pass or bandwidth; this is not an unfiltered tweeter power limit.
- Voice-coil diameter
- 25 mm
- Magnet material
- Neodymium
- Original document
- Manufacturer archived two-page datasheet, copyright 2009; marked discontinued
- Source checked
- 2026-10-10
The archived drawing shows 104 mm in the front view and 103.8 mm in the side view. Overall diameter is withheld pending clarification; no machining cutout or behind-flange depth is asserted.
Thiele/Small parameters
The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.
Sources & availability
Original Scan-Speak datasheet ↗ · Manufacturer archive ↗
Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.