◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak D2904/710000

Discontinued Revelator soft-dome tweeter with an SD-2 neodymium motor, aluminium chamber and machined aluminium faceplate. The exact 710000 revision is separate from later 710002 and 710003 versions.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Revelator
Type
Archived tweeter
Nominal dome size
1-inch soft dome
Nominal impedance
4 Ω
Diaphragm
Soft dome; material not specified in this sheet
Published sensitivity
94.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
160 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). This archived sheet does not state the test high-pass or bandwidth; this is not an unfiltered tweeter power limit.
Voice-coil diameter
25 mm
Magnet material
Neodymium
Original document
Manufacturer archived two-page datasheet, copyright 2009; marked discontinued
Source checked
2026-10-10

The archived drawing shows 104 mm in the front view and 103.8 mm in the side view. Overall diameter is withheld pending clarification; no machining cutout or behind-flange depth is asserted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →