Scan-Speak D2608/913000
Scan-Speak D2608/913000 tweeter reference with official product photos, checked specifications and external manufacturer CAD/PDF access.
Driver photographs
Product view 1Driver specifications
- Brand
- Scan-Speak
- Type
- Tweeter
- Collection
- Manufacturer catalogue
- Nominal size
- 26 mm
- Nominal impedance
- 8 Ω
- Diaphragm material
- Soft dome
- Overall diameter
- 104 mm
- Baffle cutout
- Not listed in reviewed source
- Mounting depth behind flange
- Not listed in reviewed source
- Overall depth including flange
- 34.8 mm
- Resonance (Fs)
- 700 Hz
- Total Q (Qts)
- 0.29
- Equivalent volume (Vas)
- 0.02 litres
- Source checked
- 2026-10-03
- Product family
- Discovery
Nominal size is not a recommended baffle cutout. Dimensions not separately reviewed remain unknown; check the original drawing before machining.
Thiele/Small parameters
Manufacturer PDF revision 2024-03-07; parameter table visually reviewed on 2026-10-03. Xmax is the published one-way linear excursion, not maximum mechanical excursion. Dimensions are nominal; overall depth includes the flange where listed. A recommended round baffle cutout and mounting depth behind the flange are not established here; use the original drawing, including any shaped cutout.
Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.
- Fs · resonance
- 700 Hz
- Qts · total Q
- 0.29
- Qes · electrical Q
- 0.65
- Qms · mechanical Q
- 0.51
- Vas · equivalent volume
- 0.02 L
- Re · DC resistance
- 5.6 Ω
- Le · inductance
- 0.04 mH
- Sd · piston area
- 7 cm²
- BL · force factor
- 2.6 N/A
- Mms · moving mass
- 0.18 g
- Cms · compliance
- 0.29 mm/N
- Rms · mechanical resistance
- 1.54 kg/s
- Xmax · linear excursion
- 0.5 mm
- Vd · displacement
- Not listed in reviewed source
Check the source revision and measurement conditions before design. Open original parameter source ↗
Manufacturer resources
Manufacturer PDF and 3D archive are linked externally. Their terms apply. No files are hosted here; geometry accuracy and redistribution permission are not asserted.
Official Scan-Speak product page ↗
Listed in the manufacturer catalogue. Confirm production revision, distributor stock and lead time before purchasing.