Scan-Speak D2004/602000
A compact archived 19 mm textile-dome tweeter with a protective grille, an aluminium rear chamber and a die-cast faceplate. The manufacturer specifies a second-order Butterworth high-pass at 3 kHz for its quoted power tests.
Archived front viewDriver specifications
- Brand
- Scan-Speak
- Family
- Illuminator
- Type
- Archived tweeter
- Nominal dome size
- 19 mm dome
- Nominal impedance
- 4 Ω
- Diaphragm
- Textile dome
- Published sensitivity
- 88.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
- Published power test
- 50 W in the 100-hour RMS noise test (IEC 18.4); 120 W long-term maximum (IEC 18.2), using a second-order Butterworth high-pass at 3 kHz as printed on the sheet.
- Voice-coil diameter
- 19 mm
- Overall diameter
- 55.3 mm
- Complete driver mass
- 0.1 kg
- Recommended operating range
- 3000–30000 Hz. Manufacturer recommended operating range, not a stated flatness tolerance.
- Original document
- Manufacturer archived datasheet, updated 2021-01-07, page 1
- Source checked
- 2026-10-10
Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.
Thiele/Small parameters
The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.
Sources & availability
Original Scan-Speak datasheet ↗ · Manufacturer archive ↗
Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.