◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 25W/8565-01

Discontinued Classic 10-inch woofer with a hard paper cone, low-loss rubber surround and SD-1 motor. The original 8-ohm sheet specifies a 42 mm voice coil, 88 dB sensitivity at 2.83 V / 1 m and a 100 W noise-test rating. Its 8565-01 identifier remains distinct from other revisions.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived woofer
Nominal size
10-inch (archived heading)
Nominal impedance
8 Ω
Diaphragm
Hard paper cone
Published sensitivity
88 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
100 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Filtering and bandwidth are not stated in this sheet; no unrestricted full-band power limit is inferred.
Voice-coil diameter
42 mm
Overall diameter
255 mm
Original document
Original two-page manufacturer archive sheet, copyright 2009; marked discontinued
Source checked
2026-10-13

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →