◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 25W/8562

Discontinued Classic 10-inch woofer. Its 8-ohm specification table remains separate from 8561 despite matching sensitivity and power ratings. The response graph embedded in its sheet is labelled 25W/8561, so curve data are not transferred to this record.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived woofer
Nominal size
10-inch (archived heading)
Nominal impedance
8 Ω
Diaphragm
Not specified in reviewed sheet
Published sensitivity
91 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
130 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Filtering and bandwidth are not stated in this sheet; no unrestricted full-band power limit is inferred.
Voice-coil diameter
42.5 mm
Overall diameter
255 mm
Original document
Original two-page manufacturer archive sheet, copyright 2009; marked discontinued
Source checked
2026-10-13

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

Historical T/S awaits independent exact-variant corroboration. The original embedded response graph is labelled 25W/8561 rather than 8562; no graph points are reproduced.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →