◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 23W/4557T02

Archived 23 cm Revelator subwoofer with a black anodised aluminium cone, a ferrite motor and a 50 mm voice coil. The original 4-ohm sheet separates 225 W noise-test power from 350 W long-term maximum power; the finish and suffix remain distinct.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Revelator
Type
Archived subwoofer
Nominal size
23 cm (manufacturer nominal heading)
Nominal impedance
4 Ω
Diaphragm
Black anodised aluminium cone
Published sensitivity
82 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
225 W in the 100-hour RMS noise test (sheet labels IEC 18.4); 350 W long-term maximum (sheet labels IEC 18.2). The sheet specifies no crossover. IEC edition and test bandwidth are not stated; original labels are preserved.
Voice-coil diameter
50 mm
Overall diameter
255 mm
Complete driver mass
4.6 kg
Magnet material
Ferrite
Original document
Original one-page manufacturer archive datasheet updated 25 January 2021
Source checked
2026-10-13

Original exact-model drawing: 255 mm outside diameter, tolerance +0 / -0.4 mm. The 225 mm basket dimension is not relabelled a recommended finished cutout; mounting depth remains unlisted.

Construction, mounting & original reference

Open a section for documented details and its original source.

Construction
Diaphragm / chassis
Black anodised aluminium cone; die-cast aluminium chassis, vented below the spider
Motor
Ferrite magnet system with rubber boot
Voice-coil geometry
50 mm diameter; 34 mm coil height; 2 layers; 8 mm gap height
Terminals
Gold binding-post terminals

Original Scan-Speak datasheet ↗ · Single page, updated 25 January 2021

Mounting drawing
Bolt-hole pitch diameter
240 mm
Fixings
10 holes, Ø 5.3 mm ±0.1 mm
Flange thickness
6 mm
Frame tolerance
255 mm outside diameter, +0 / −0.4 mm

The drawing uses different angular intervals; equally spaced holes are not assumed. The basket diameter is not a finished baffle cutout.

Original Scan-Speak datasheet ↗ · Single-page drawing

Original enclosure examples
Closed box
49 L; manufacturer example −3 dB frequency 29 Hz
Vented box
100 L; tuning 17 Hz; manufacturer example −3 dB frequency 15 Hz
Recommended operating band
The sheet specifies Fs to 1000 Hz

Manufacturer reference examples for the exact original driver. These are not calculations from measurements of your individual unit; the sheet asks readers to consult its technical note.

Original Scan-Speak datasheet ↗ · Recommendations table

Response & impedance curves
Available plots
On-axis, 30° and 60° frequency-response curves, plus impedance
Sensitivity reference
Published sensitivity uses 2.83 V / 1 m; plot setup is not fully specified

Curves remain in the external document. No digitised trace or common acoustic phase is inferred.

Open the original curves ↗ · Bottom of single-page datasheet

Identify the reference
Exact version
23W/4557T02, black cone, 4 ohms
Document date
25 January 2021; an archive reference, not an individual production date

Original Scan-Speak datasheet ↗ · Updated 25 January 2021

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →