Scan-Speak 21W/8555-00
Archived Classic 8-ohm woofer with a paper/carbon-fibre cone, SD-1 motor and SBR rubber surround. Its March 2013 sheet documents a 42 mm voice coil, 222 mm frame and 100 W noise-test rating. Preliminary advanced-model values remain separate from the basic table.
Archived product viewDriver specifications
- Brand
- Scan-Speak
- Family
- Classic
- Type
- Archived woofer
- Nominal size
- 222 mm overall frame; nominal size not listed in reviewed sheet
- Nominal impedance
- 8 Ω
- Diaphragm
- Air-dried paper/carbon-fibre cone
- Published sensitivity
- 87 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
- Published power test
- 100 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Filtering and bandwidth are not stated in this archived sheet; no unrestricted full-band power limit is inferred.
- Voice-coil diameter
- 42 mm
- Overall diameter
- 222 mm
- Complete driver mass
- 2.2 kg
- Original document
- Original manufacturer sheet updated 6 March 2013; retained in historical archive
- Source checked
- 2026-10-13
Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.
Thiele/Small parameters
The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.
Sources & availability
Original Scan-Speak datasheet ↗ · Manufacturer archive ↗
Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.