◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 21W/8554-00

Discontinued Classic 8-inch woofer with a Kevlar cone, foam surround and SD motor. The original 8-ohm reference gives a 42 mm voice coil and 110 W manufacturer noise-test rating. Its original 8554-00 revision is preserved.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived woofer
Nominal size
8-inch (archived heading)
Nominal impedance
8 Ω
Diaphragm
Kevlar cone
Published sensitivity
90 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
110 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Filtering and bandwidth are not stated in this archived sheet; no unrestricted full-band power limit is inferred.
Voice-coil diameter
42 mm
Overall diameter
222 mm
Original document
Original two-page manufacturer archive datasheet, copyright 2009; marked discontinued
Source checked
2026-10-13

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →