Scan-Speak 18W/8546-00
Discontinued Classic midwoofer with a Kevlar cone, low-loss rubber surround and SD-1 motor. Its original 8-ohm sheet specifies a 42 mm voice coil, 177 mm outside diameter and sensitivity referenced to 2.83 V / 1 m.
Archived product viewDriver specifications
- Brand
- Scan-Speak
- Family
- Classic
- Type
- Archived midwoofer
- Nominal size
- 6.5-inch (archived heading)
- Nominal impedance
- 8 Ω
- Diaphragm
- Kevlar cone
- Published sensitivity
- 88 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
- Published power test
- 100 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Filtering and bandwidth are not stated in this archived sheet; no unrestricted full-band power limit is inferred.
- Voice-coil diameter
- 42 mm
- Overall diameter
- 177 mm
- Original document
- Original two-page manufacturer archive datasheet, copyright 2009; marked discontinued
- Source checked
- 2026-10-13
Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.
Thiele/Small parameters
The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.
Sources & availability
Original Scan-Speak datasheet ↗ · Manufacturer archive ↗
Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.