◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 18W/8545-00

Archived Classic 8-ohm midwoofer with an air-dried paper/carbon-fibre cone, SD-1 motor and SBR rubber surround. The original 2013 sheet distinguishes a 100 W noise test from 170 W long-term maximum power. This revision remains separate from 8545-01 and K00 versions.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived midwoofer
Nominal size
177 mm overall frame; nominal size not listed in reviewed sheet
Nominal impedance
8 Ω
Diaphragm
Air-dried paper/carbon-fibre cone
Published sensitivity
88 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
100 W 100-hour RMS noise test (IEC 17.1); 170 W long-term maximum (IEC 17.3). IEC 60268-5 third edition; filtering/bandwidth unlisted. Separate test ratings, not interchangeable limits.
Voice-coil diameter
42 mm
Overall diameter
177 mm
Complete driver mass
2.3 kg
Original document
Original manufacturer sheet updated 30 January 2013; marked "To be discontinued"
Source checked
2026-10-13

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Original sheet says "To be discontinued" and is now retained in the manufacturer archive outside the reviewed current catalogue. Final production date and used-unit stock are not established.

Search historical Scan-Speak references →