◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 18W/8535-00

Archived Classic 8-ohm midwoofer with a paper/carbon-fibre cone, SD-1 motor and SBR rubber surround. The January 2013 sheet distinguishes its 70 W 100-hour noise test from 150 W long-term maximum power, and labels the model for discontinuation.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived midwoofer
Nominal size
177 mm overall frame; nominal size not listed in reviewed sheet
Nominal impedance
8 Ω
Diaphragm
Air-dried paper/carbon-fibre cone
Published sensitivity
86.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
70 W in the 100-hour RMS noise test (IEC 17.1); 150 W long-term maximum (IEC 17.3), under IEC 60268-5 third edition. Filtering and bandwidth unlisted; these are separate ratings.
Voice-coil diameter
38 mm
Overall diameter
177 mm
Complete driver mass
1.1 kg
Original document
Manufacturer datasheet updated 30 January 2013; marked "To be discontinued" in the archive
Source checked
2026-10-12

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Original sheet marks the model "To be discontinued"; it is retained in the manufacturer archive and absent from the reviewed current catalogue. Final production date and current used stock are not established.

Search historical Scan-Speak references →