◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 18W/4545-00

Archived Classic 4-ohm midwoofer with an air-dried paper/carbon-fibre cone, SD-1 motor and SBR rubber surround. Its original sheet specifies a 42 mm voice coil and 177 mm overall frame. Preliminary advanced-model parameters remain distinct from the basic table.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived midwoofer
Nominal size
177 mm overall frame; nominal size not listed in reviewed sheet
Nominal impedance
4 Ω
Diaphragm
Air-dried paper/carbon-fibre cone
Published sensitivity
90 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
80 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Filtering and bandwidth are not stated in the reviewed sheet; no unrestricted full-band power limit is inferred.
Voice-coil diameter
42 mm
Overall diameter
177 mm
Complete driver mass
2.4 kg
Original document
Manufacturer original datasheet updated 22 February 2011, retained in the historical archive
Source checked
2026-10-12

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →