◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 18W/16531G1

Archived 16-ohm Revelator midwoofer. The manufacturer identifies it as the 16-ohm form of 18W/8531G00; its original 83 dB sensitivity uses 2.83 V / 1 m. This exact 16531G1 identifier remains separate from other impedances.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Revelator
Type
Archived midwoofer
Nominal size
6.5-inch (archived heading)
Nominal impedance
16 Ω
Diaphragm
Not specified in reviewed sheet
Published sensitivity
83 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
60 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Filtering and bandwidth are not stated in the reviewed sheet; no unrestricted full-band power limit is inferred.
Voice-coil diameter
38 mm
Overall diameter
182 mm
Original document
Archived original two-page manufacturer datasheet, copyright 2009; marked discontinued
Source checked
2026-10-12

The exact-model drawing specifies 182 mm outside diameter (±0.3 mm). Maximum mounting diameter 156 mm is not relabelled a recommended cutout; depth and cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →