◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 18S/8535-00

Discontinued shielded Classic midwoofer with a carbon-fibre/paper cone, rubber suspension and SD-1 motor. The exact 18S/8535-00 sheet specifies a 38 mm voice coil and 177 mm frame; unshielded W versions remain separate references.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived midwoofer
Nominal size
6.5-inch (archived heading)
Nominal impedance
8 Ω
Diaphragm
Carbon-fibre/paper cone
Published sensitivity
86.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
70 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Test filtering and bandwidth are not stated in this archived sheet; no unrestricted full-band power limit is inferred.
Voice-coil diameter
38 mm
Overall diameter
177 mm
Original document
Manufacturer archived two-page datasheet, copyright 2009; marked discontinued
Source checked
2026-10-12

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →