◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 15W/8831G00

Discontinued Revelator midwoofer with a sliced paper cone and a rubber cover around its motor. The manufacturer identifies it as the 15W/8531K00 with a rubber boot. This original reference has its own ratings and a 1.75 kg complete-driver mass.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Revelator
Type
Archived midwoofer
Nominal size
5.25-inch (archived heading)
Nominal impedance
8 Ω
Diaphragm
Sliced paper cone
Published sensitivity
85.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
60 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). Test filtering and bandwidth are not stated in this archived sheet; no unrestricted full-band power limit is inferred.
Voice-coil diameter
38 mm
Overall diameter
148.25 mm
Complete driver mass
1.75 kg
Original document
Manufacturer archived two-page datasheet, copyright 2009; marked discontinued
Source checked
2026-10-12

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →