◉SpeakerFoundryFREE DRIVER RESOURCES / 01
VINTAGE DRIVER REFERENCE

Scan-Speak 13M/8636-00

Discontinued Classic midrange combining a Kevlar cone, SD motor and rubber surround. The archived sheet gives a 130 mm frame and 86.5 dB sensitivity at 2.83 V / 1 m. Its exact 8636-00 suffix is preserved.

PDF ↗

Driver specifications

Brand
Scan-Speak
Family
Classic
Type
Archived midrange
Nominal size
4-inch (archived heading)
Nominal impedance
8 Ω
Diaphragm
Kevlar cone
Published sensitivity
86.5 dB. Manufacturer sensitivity at 2.83 V / 1 m. This voltage reference is preserved and is not relabelled 1 W / 1 m.
Published power test
100 W in the manufacturer 100-hour RMS noise test (IEC 60268-5, third edition). The archived sheet does not specify test filtering or bandwidth; this is not an unrestricted full-band power limit.
Voice-coil diameter
38 mm
Overall diameter
130 mm
Original document
Manufacturer archived two-page datasheet, copyright 2009; marked discontinued
Source checked
2026-10-12

Overall diameter is taken from the original drawing where clear. Magnet dimensions are not treated as recommended baffle cutouts. Mounting depth and a machining-ready cutout remain unlisted.

Thiele/Small parameters

The original manufacturer sheet is linked below. Historical T/S values await a second credible source for this exact variant before being reproduced here; no values from newer replacements are substituted.

Sources & availability

Original Scan-Speak datasheet ↗ · Manufacturer archive ↗

Archived exact-model reference outside the reviewed current catalogue. Original production dates and used-unit stock are not established. Confirm condition and original parts before purchase.

Search historical Scan-Speak references →