◉SpeakerFoundryFREE DRIVER RESOURCES / 01
MANUFACTURER SPECIFICATION REFERENCE

SB Acoustics SW26SFC38-4

Specification reference for SW26SFC38-4. Consult SB Acoustics documentation and measure your own unit before final design.

PDF / documentation ↗

Driver specifications

Driver type
Subwoofer
Nominal size
10 inches
Nominal impedance
4 Ω
Diaphragm material
Paper

Mounting dimensions are not yet reviewed here. Use the manufacturer drawing before machining; nominal size is not a baffle cutout.

Thiele/Small parameters & ratings

Published manufacturer product-table values for this exact variant. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.

Re · DC resistance
3.5 Ω
Le · inductance
1.27 mH
Fs · free-air resonance
27 Hz
Sd · piston area
340 cm²
Voice-coil diameter
38.5 mm
Linear coil travel · peak-to-peak
7 mm
Qms · mechanical Q
4.94
Qes · electrical Q
0.3
Qts · total Q
0.29
Mms · moving mass
64 g
BL · force factor
11.2 N/A
Vas · equivalent volume
88 L
Cms · compliance
0.54 mm/N
Rms · mechanical loss
2.2 kg/s
Sensitivity · 2.83 V / 1 m
91.5 dB SPL
Rated power · see test conditions
80 W
Total mass
0.94 kg

Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, T/S parameters measured on drive units that are broke in.

Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.

Availability & original sources

Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.

SB Acoustics product page ↗

Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.

Search & compare SB Acoustics drivers →