◉SpeakerFoundryFREE DRIVER RESOURCES / 01
MANUFACTURER SPECIFICATION REFERENCE

SB Acoustics SB36WBAC21-8

Specification reference for SB36WBAC21-8. Consult SB Acoustics documentation and measure your own unit before final design.

PDF / documentation ↗

Driver specifications

Driver type
Full-range
Nominal size
1 inches
Nominal impedance
8 Ω
Diaphragm material
Aluminum

Mounting dimensions are not yet reviewed here. Use the manufacturer drawing before machining; nominal size is not a baffle cutout.

Thiele/Small parameters & ratings

Published manufacturer product-table values for this exact variant. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.

Re · DC resistance
5.8 Ω
Le · inductance
0.13 mH
Fs · free-air resonance
160 Hz
Sd · piston area
4.2 cm²
Voice-coil diameter
20.4 mm
Linear coil travel · peak-to-peak
3.5 mm
Qms · mechanical Q
1.75
Qes · electrical Q
0.92
Qts · total Q
0.61
Mms · moving mass
0.7 g
BL · force factor
2.1 N/A
Vas · equivalent volume
0.035 L
Cms · compliance
1.39 mm/N
Rms · mechanical loss
0.4 kg/s
Sensitivity · 2.83 V / 1 m
75 dB SPL
Rated power · see test conditions
5 W
Total mass
0.055 kg

Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, high-pass Butterworth, 200 Hz, 12 dB/oct, T/S parameters measured on drive units that are broken in.

Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.

Availability & original sources

Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.

SB Acoustics product page ↗

Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.

Search & compare SB Acoustics drivers →