◉SpeakerFoundryFREE DRIVER RESOURCES / 01
MANUFACTURER SPECIFICATION REFERENCE

SB Acoustics SB34SWPL76-4

Specification reference for SB34SWPL76-4. Consult SB Acoustics documentation and measure your own unit before final design.

PDF / documentation ↗

Driver specifications

Driver type
Subwoofer
Nominal size
12 inches
Nominal impedance
4 Ω
Diaphragm material
Paper

Mounting dimensions are not yet reviewed here. Use the manufacturer drawing before machining; nominal size is not a baffle cutout.

Thiele/Small parameters & ratings

Published manufacturer product-table values for this exact variant. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.

Re · DC resistance
3.5 Ω
Le · inductance
5.3 mH
Fs · free-air resonance
19 Hz
Sd · piston area
458 cm²
Voice-coil diameter
76 mm
Linear coil travel · peak-to-peak
30 mm
Qms · mechanical Q
7.7
Qes · electrical Q
0.33
Qts · total Q
0.32
Mms · moving mass
264 g
BL · force factor
18.3 N/A
Vas · equivalent volume
79 L
Cms · compliance
0.27 mm/N
Rms · mechanical loss
4.1 kg/s
Sensitivity · 2.83 V / 1 m
85 dB SPL
Rated power · see test conditions
300 W
Total mass
7.68 kg

Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, T/S parameters measured on drive units that are broken in.

Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.

Availability & original sources

Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.

SB Acoustics product page ↗

Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.

Search & compare SB Acoustics drivers →