◉SpeakerFoundryFREE DRIVER RESOURCES / 01
MANUFACTURER SPECIFICATION REFERENCE

SB Acoustics SB26ST-C000-5

Specification reference for SB26ST-C000-5. Consult SB Acoustics documentation and measure your own unit before final design.

PDF / documentation ↗

Driver specifications

Driver type
Tweeter
Nominal size
Not listed in reviewed product table
Nominal impedance
5 Ω
Diaphragm material
Fabric
Overall diameter
100 ± 0.35 mm
Mounting depth behind flange
26.7 mm
Bolt circle diameter
88.5 mm
Mounting-hole diameter
4 mm
Drawing previously checked
2026-10-07

Drawing dimensions were checked separately. Open the original drawing ↗ before machining. Behind the rear mounting face; front dome projection is not included.

Thiele/Small parameters & ratings

Published manufacturer product-table values for this exact variant. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.

Re · DC resistance
4.4 Ω
Le · inductance
0.07 mH
Fs · free-air resonance
870 Hz
Sd · piston area
6.2 cm²
Voice-coil diameter
25.4 mm
Linear coil travel · peak-to-peak
1.2 mm
Qms · mechanical Q
5
Qes · electrical Q
1.64
Qts · total Q
1.24
Mms · moving mass
0.33 g
BL · force factor
2.2 N/A
Sensitivity · 2.83 V / 1 m
91 dB SPL
Rated power · see test conditions
80 W
Total mass
0.51 kg

Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, high-pass Butterworth, 2600 Hz, 12 dB/oct.

Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.

Availability & original sources

Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.

SB Acoustics product page ↗

Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.

Search & compare SB Acoustics drivers →