SB Acoustics SB26SFCL38-8
Specification reference for SB26SFCL38-8. Consult SB Acoustics documentation and measure your own unit before final design.
Product viewsDriver specifications
- Driver type
- Woofer
- Nominal size
- 10 inches
- Nominal impedance
- 8 Ω
- Diaphragm material
- Paper
Mounting dimensions are not yet reviewed here. Use the manufacturer drawing before machining; nominal size is not a baffle cutout.
Thiele/Small parameters & ratings
Published manufacturer product-table values for this exact variant. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.
- Re · DC resistance
- 6 Ω
- Le · inductance
- 1.6 mH
- Fs · free-air resonance
- 27.5 Hz
- Sd · piston area
- 346 cm²
- Voice-coil diameter
- 38.5 mm
- Linear coil travel · peak-to-peak
- 16.4 mm
- Qms · mechanical Q
- 5.09
- Qes · electrical Q
- 0.6
- Qts · total Q
- 0.53
- Mms · moving mass
- 53 g
- BL · force factor
- 9.6 N/A
- Vas · equivalent volume
- 107 L
- Cms · compliance
- 0.63 mm/N
- Rms · mechanical loss
- 1.8 kg/s
- Sensitivity · 2.83 V / 1 m
- 88 dB SPL
- Rated power · see test conditions
- 80 W
- Total mass
- 2.9 kg
Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, T/S parameters measured on drive units that are broken in.
Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.
Availability & original sources
Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.
SB Acoustics product page ↗Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.