SB Acoustics SB23MFCL45-8
Specification reference for SB23MFCL45-8. Consult SB Acoustics documentation and measure your own unit before final design.
Product viewsDriver specifications
- Driver type
- Subwoofer
- Nominal size
- 8 inches
- Nominal impedance
- 8 Ω
- Diaphragm material
- Polypropylene
Mounting dimensions are not yet reviewed here. Use the manufacturer drawing before machining; nominal size is not a baffle cutout.
Thiele/Small parameters & ratings
Published manufacturer product-table values for this exact variant. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.
- Re · DC resistance
- 6.2 Ω
- Le · inductance
- 1.02 mH
- Fs · free-air resonance
- 28.5 Hz
- Sd · piston area
- 210 cm²
- Voice-coil diameter
- 45.5 mm
- Linear coil travel · peak-to-peak
- 21 mm
- Qms · mechanical Q
- 7.3
- Qes · electrical Q
- 0.46
- Qts · total Q
- 0.43
- Mms · moving mass
- 53 g
- BL · force factor
- 11.3 N/A
- Vas · equivalent volume
- 37 L
- Cms · compliance
- 0.59 mm/N
- Rms · mechanical loss
- 1.3 kg/s
- Sensitivity · 2.83 V / 1 m
- 85 dB SPL
- Rated power · see test conditions
- 150 W
- Total mass
- 4.7 kg
Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, T/S parameters measured on drive units that are broken in.
Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.
Availability & original sources
Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.
SB Acoustics product page ↗Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.