SB Acoustics SB20PFCS30-7
Specification reference for SB20PFCS30-7. Consult SB Acoustics documentation and measure your own unit before final design.
Product viewsDriver specifications
- Driver type
- Woofer
- Nominal size
- 8 inches
- Nominal impedance
- 7 Ω
- Diaphragm material
- Paper
Mounting dimensions are not yet reviewed here. Use the manufacturer drawing before machining; nominal size is not a baffle cutout.
Thiele/Small parameters & ratings
Published manufacturer product-table values for this exact variant. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.
- Re · DC resistance
- 5 Ω
- Le · inductance
- 0.95 mH
- Fs · free-air resonance
- 39 Hz
- Sd · piston area
- 222 cm²
- Voice-coil diameter
- 30.5 mm
- Linear coil travel · peak-to-peak
- 11 mm
- Qms · mechanical Q
- 4.5
- Qes · electrical Q
- 0.77
- Qts · total Q
- 0.66
- Mms · moving mass
- 19.6 g
- BL · force factor
- 5.6 N/A
- Vas · equivalent volume
- 59.5 L
- Cms · compliance
- 0.85 mm/N
- Rms · mechanical loss
- 1.07 kg/s
- Sensitivity · 2.83 V / 1 m
- 88 dB SPL
- Rated power · see test conditions
- 40 W
- Total mass
- 0.96 kg
Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, T/S parameters measured on drive units that are broken in.
Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.
Availability & original sources
Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.
SB Acoustics product page ↗Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.