◉SpeakerFoundryFREE DRIVER RESOURCES / 01
MANUFACTURER SPECIFICATION REFERENCE

SB Acoustics SB15CRC30-8

Specification reference for SB15CRC30-8. Consult SB Acoustics documentation and measure your own unit before final design.

PDF / documentation ↗

Driver specifications

Driver type
Midwoofer
Nominal size
5 inches
Nominal impedance
8 Ω
Diaphragm material
Carbon
Overall diameter
150 mm
Mounting depth behind flange
68.3 mm
Drawing previously checked
2026-10-06

Drawing dimensions were checked separately. Open the original drawing ↗ before machining.

Thiele/Small parameters & ratings

Published manufacturer product-table values for this exact variant. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.

Re · DC resistance
5.9 Ω
Le · inductance
0.14 mH
Fs · free-air resonance
40 Hz
Sd · piston area
82 cm²
Voice-coil diameter
30.5 mm
Linear coil travel · peak-to-peak
11 mm
Qms · mechanical Q
3.52
Qes · electrical Q
0.46
Qts · total Q
0.41
Mms · moving mass
9.8 g
BL · force factor
5.6 N/A
Vas · equivalent volume
14.9 L
Cms · compliance
1.62 mm/N
Rms · mechanical loss
0.7 kg/s
Sensitivity · 2.83 V / 1 m
86 dB SPL
Rated power · see test conditions
50 W
Total mass
1.46 kg

Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, T/S parameters measured on drive units that are broken in.

Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.

Availability & original sources

Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.

SB Acoustics product page ↗

Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.

Search & compare SB Acoustics drivers →