◉SpeakerFoundryFREE DRIVER RESOURCES / 01
OEM MANUFACTURER REFERENCE

SB Acoustics SB13PFC25-8

Specification reference for SB13PFC25-8. This is an OEM reference; confirm supply conditions. Consult SB Acoustics documentation and measure your own unit before final design.

PDF / documentation ↗

Driver specifications

Driver type
Midwoofer
Nominal size
5 inches
Nominal impedance
8 Ω
Diaphragm material
Paper

Mounting dimensions are not yet reviewed here. Use the manufacturer drawing before machining; nominal size is not a baffle cutout.

Thiele/Small parameters & ratings

Published manufacturer product-table values for this exact variant. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.

Re · DC resistance
5.6 Ω
Le · inductance
0.77 mH
Fs · free-air resonance
45 Hz
Sd · piston area
87 cm²
Voice-coil diameter
25.4 mm
Linear coil travel · peak-to-peak
9 mm
Qms · mechanical Q
2.2
Qes · electrical Q
0.39
Qts · total Q
0.33
Mms · moving mass
10 g
BL · force factor
6.2 N/A
Vas · equivalent volume
13.4 L
Cms · compliance
1.25 mm/N
Rms · mechanical loss
1.4 kg/s
Sensitivity · 2.83 V / 1 m
87 dB SPL
Rated power · see test conditions
40 W
Total mass
0.89 kg

Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, T/S parameters measured on drive units that are broken in.

Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.

Availability & original sources

Manufacturer marks this reference for OEM supply or withdrawal from its standard range. Confirm minimum order quantities, production and availability directly with SB Acoustics.

SB Acoustics product page ↗

Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.

Search & compare SB Acoustics drivers →