SB Acoustics SB12PFCR25-4-COAX
Specification reference for SB12PFCR25-4-COAX. The woofer and tweeter have separate connections and specifications. Consult SB Acoustics documentation and measure your own unit before final design.
Product viewsDriver specifications
- Driver type
- Coaxial
- Nominal size
- 4 inches
- Nominal impedance
- 4 Ω woofer / 4 Ω tweeter
- Diaphragm material
- See manufacturer source
Mounting dimensions are not yet reviewed here. Use the manufacturer drawing before machining; nominal size is not a baffle cutout.
Woofer Thiele/Small parameters
Published manufacturer product-table values for this exact variant. Main T/S values belong to the woofer; the coaxial tweeter has a separate parameter section. The manufacturer states that drive units are broken in. Linear coil travel marked p-p is peak-to-peak. Xmech is mechanical travel, not Xmax.
- Re · DC resistance
- 3.1 Ω
- Le · inductance
- 0.26 mH
- Fs · free-air resonance
- 58 Hz
- Sd · piston area
- 45 cm²
- Voice-coil diameter
- 25.4 mm
- Linear coil travel · peak-to-peak
- 10 mm
- Qms · mechanical Q
- 4.07
- Qes · electrical Q
- 0.36
- Qts · total Q
- 0.33
- Mms · moving mass
- 4.5 g
- BL · force factor
- 3.8 N/A
- Vas · equivalent volume
- 4.8 L
- Cms · compliance
- 1.66 mm/N
- Rms · mechanical loss
- 0.4 kg/s
- Sensitivity · 2.83 V / 1 m
- 87 dB SPL
- Rated power · see test conditions
- 30 W
- Total mass
- 0.86 kg
Published 2.83 V / 1 m reference; not a 1 W sensitivity rating. IEC 268-5, T/S parameters measured on drive units that are broken in.
Only checked values are listed. Omitted fields are not assumed to be zero. Source: SB Acoustics product table ↗, checked 2026-10-07.
Coaxial tweeter specifications
The main T/S table is for the woofer. The tweeter has its own electrical connection and ratings.
- Tweeter nominal impedance
- 4 Ω
- Re · DC resistance
- 3 Ω
- Fs · free-air resonance
- 1300 Hz
- Voice-coil diameter
- 12.4 mm
- Sensitivity · 2.83 V / 1 m
- 89 dB SPL
- Rated power · see test conditions
- 10 W
- Total mass
- 0.014 kg
Consult the external datasheet for tweeter high-pass power-test conditions and design limits.
Availability & original sources
Listed on the manufacturer website when checked. Confirm current production, revision, dealer stock and lead time with SB Acoustics.
SB Acoustics product page ↗Product information and supplied photographs: SB Acoustics ↗. PDF and CAD files open at their external source.