RCF LF18N401 · 8 Ω
18-inch professional woofer with an 8-ohm rating, neodymium magnet and triple-roll suspension. Its stated linear excursion is retained separately from the manufacturer’s much larger damage-limit travel.
Driver specifications
- Nominal impedance
- 8 Ω
- Nominal size
- 18-inch nominal
- Part number
- 11100010
- Power ratings
- 1200 W manufacturer power-handling capacity; 2400 W program rating. The reviewed sheet does not identify a test duration or filter bandwidth; no AES/continuous test equivalence is inferred.
- Sensitivity
- 98 dB. Published manufacturer dB value. The reviewed specifications do not establish its reference voltage/power or averaging band; those conditions are not assumed.
- Voice-coil diameter
- 102 mm
- Magnet
- Neodymium
- Overall diameter
- 465 mm
- Front-mount cutout
- 424 mm
- Rear-mount cutout
- 424 mm
- Overall height
- 204 mm
- Complete driver mass
- 9.5 kg
- Frequency range
- 30–1000 Hz. Manufacturer frequency range; a flatness tolerance is not stated.
Front-mount cutout 424 mm; rear-mount cutout 424 mm. Overall height 204 mm is not a verified behind-flange mounting depth. Consult the manufacturer drawing before machining.
Thiele/Small parameters
- Fs
- 32 Hz
- Qts
- 0.26
- Qes
- 0.27
- Qms
- 6.5
- Vas
- 257 L
- Re
- 5.1 Ω
- Le
- 2.5 mH at 1 kHz
- Sd
- 1200 cm²
- BL
- 27.8 T·m
- Mms
- 201 g
- Cms
- Not listed
- Rms
- Not listed
- Xmax
- 9 mm
- Vd
- Not listed
Original RCF small-signal values; Le is specified at 1 kHz. Sd is displayed in cm²: 0.090 m² becomes 900 cm² and 0.120 m² becomes 1200 cm². LF12G301 Sd remains unlisted because the original entry is inconsistent. Unlisted values are not calculated.
Sources & availability
RCF product page ↗ · Manufacturer specification sheet ↗
Listed in the official RCF transducer catalogue when checked on 2026-10-12. Confirm the exact part number, stock and production status with the supplier.
Checked 2026-10-12. Official product page and linked English specification sheet (download listed 2025-10-20), checked 2026-10-12