PURIFI PTT1.3T04-HAG-10 WG147
PURIFI PTT1.3T04-HAG-10 WG147 tweeter reference. 4 ohm. Checked specification facts, manufacturer documentation and CAD access status.
Driver specifications
- Brand
- PURIFI
- Type
- Tweeter
- Collection
- Manufacturer catalogue
- Nominal size
- 1.3 inches
- Nominal impedance
- 4 Ω
- Diaphragm material
- Hard Anodized Aluminum
- Overall diameter
- 147 mm
- Baffle cutout
- 123 mm
- Mounting depth behind flange
- 52 mm
- Resonance (Fs)
- 680 Hz
- Source checked
- 2026-10-05
Awaiting source review means that field has not yet been checked. Not listed in reviewed source applies only to reviewed documentation; conflicting values remain withheld. Nominal size and basket diameter are not recommended baffle cutouts.
Used in loudspeaker
Documented examples for this exact driver. Factory products, manufacturer kits and designer DIY projects are identified separately.
No documented loudspeaker uses have been added for this driver yet. This means the reference list is incomplete, not that the driver has never been used.
These examples are not a compatibility guide, replacement recommendation or endorsement. OEM variants, production changes and modified speakers may use different parts. Check the original documentation for the exact loudspeaker version.
Thiele/Small parameters
Published manufacturer reference values. Powertest crossover: 2nd order high pass Butterworth @ 2.5kHz. Voice Coil inductance @ 2kHz 0mm, Le: 0.013mH. SPL @ 2.83Vrms/1m, 3kHz: 96.0dB. SPL @ 1W/1m, 3kHz: 92.9dB. Linear excursion shown as ±0.5 mm (one-way amplitude). Manufacturer maximum mechanical excursion: ±0.5mm; this is not the linear excursion.
Checked source values; missing fields show their review status. These are published reference specifications, not measurements of an individual driver.
- Fs · resonance
- 680 Hz
- Qts · total Q
- Not listed in reviewed source
- Qes · electrical Q
- Not listed in reviewed source
- Qms · mechanical Q
- Not listed in reviewed source
- Vas · equivalent volume
- Not listed in reviewed source
- Re · DC resistance
- 3.5 Ω
- Le · inductance
- 0.013 mH
- Sd · piston area
- 9.5 cm²
- BL · force factor
- 2.8 N/A
- Mms · moving mass
- 0.45 g
- Cms · compliance
- Not listed in reviewed source
- Rms · mechanical resistance
- Not listed in reviewed source
- Xmax · linear excursion
- 0.5 mm
- Vd · displacement
- Not listed in reviewed source
Check the source revision and measurement conditions before design. Open original parameter source ↗
CAD origin and access
External manufacturer CAD — link to manufacturer’s download rather than re-hosting
Official specification reference and product photograph used with PURIFI’s written permission. CAD and PDF resources open on the manufacturer’s website.
Open manufacturer CAD ↗External manufacturer link. No file is hosted here and no redistribution permission is asserted.
Technical sources
Open manufacturer PDF ↗Official manufacturer catalogue listing. Confirm current stock, production status and lead time with PURIFI.
Check the exact revision and original drawing before purchasing or machining. Published specifications may change. Complete geometry and live stock are not certified by this library.
