PURIFI PTT6.5X04-NLA-10
PURIFI PTT6.5X04-NLA-10 woofer OEM reference with verified datasheet specifications, T/S parameters and external manufacturer PDF. Bulk procurement by enquiry.
Driver specifications
- Brand
- PURIFI
- Type
- Woofer
- Collection
- OEM / bulk catalogue
- Nominal size
- 6.5 inches
- Nominal impedance
- 4 Ω
- Diaphragm material
- PP Coated Proprietary Fibre Mix
- Overall diameter
- 176 mm
- Baffle cutout
- 148 mm
- Mounting depth behind flange
- 85.2 mm
- Source checked
- 2026-10-05
Thiele/Small parameters
Datasheet revision 1.00 / November 2022. Values use the detailed specification tables rather than rounded cover summaries. Inductance: 1 kHz, voice-coil position 0 mm. Sensitivity: 88 dB at 2.83 Vrms / 1 m, 300–800 Hz, reference 20 µPa, infinite baffle / 2π. Linear excursion shown as ±9.8 mm (one-way amplitude). Manufacturer mechanical excursion: ±14.5 mm; this is not the linear excursion.
- Fs · resonance
- 30 Hz
- Qts · total Q
- 0.32
- Qes · electrical Q
- 0.34
- Qms · mechanical Q
- 6.2
- Vas · equivalent volume
- 23.9 L
- Re · DC resistance
- 3.7 Ω
- Le · inductance
- 0.4 mH
- Sd · piston area
- 132.7 cm²
- BL · force factor
- 7.8 N/A
- Mms · moving mass
- 28.7 g
- Cms · compliance
- 0.96 mm/N
- Rms · mechanical resistance
- 0.89 kg/s
- Xmax · linear excursion
- 9.8 mm
- Vd · displacement
- Not listed in reviewed source
Published manufacturer reference values, not measurements of your individual driver. Open exact-model datasheet ↗
OEM procurement & sources
PURIFI OEM catalogue listing; sold in bulk containers by manufacturer enquiry. Confirm minimum order, specifications, exact revision and lead time with PURIFI. This is not a retail stock listing.
Official PURIFI OEM catalogue ↗
OEM variant listed by PURIFI, supplied in bulk through manufacturer enquiry. Specifications are reference values for this exact model; do not substitute the similarly named retail variant. CAD files and PDF datasheets remain external manufacturer resources.
Use the manufacturer’s exact model and latest revision before fabrication or design. Dimensions are published reference values; no complete CAD geometry or machining tolerance is certified here.