PURIFI PTT5.25X04-NAA-06
PURIFI PTT5.25X04-NAA-06 woofer OEM reference with verified datasheet specifications, T/S parameters and external manufacturer PDF. Bulk procurement by enquiry.
Driver specifications
- Brand
- PURIFI
- Type
- Woofer
- Collection
- OEM / bulk catalogue
- Nominal size
- 5.25 inches
- Nominal impedance
- 4 Ω
- Diaphragm material
- Black Anodized Aluminum
- Overall diameter
- 147 mm
- Baffle cutout
- 121 mm
- Mounting depth behind flange
- 75 mm
- Source checked
- 2026-10-05
Thiele/Small parameters
Datasheet revision v1.00 / December 2025. Values use the detailed specification tables rather than rounded cover summaries. Inductance: 1 kHz, voice-coil position 0 mm. Linear excursion shown as ±9.8 mm (one-way amplitude). Manufacturer mechanical excursion: ±14 mm; this is not the linear excursion. The v1.00 datasheet gives 29 Hz; the OEM summary gives 27 Hz. Fs is withheld until clarified. The v1.00 datasheet gives 84.9 dB at 2.83 Vrms/1 m; the OEM summary gives 85.2 dB. Sensitivity is withheld until clarified.
- Fs · resonance
- Conflicting source values
- Qts · total Q
- 0.27
- Qes · electrical Q
- 0.28
- Qms · mechanical Q
- 5.9
- Vas · equivalent volume
- 11.8 L
- Re · DC resistance
- 3.6 Ω
- Le · inductance
- 0.37 mH
- Sd · piston area
- 84.9 cm²
- BL · force factor
- 7.9 N/A
- Mms · moving mass
- 25.9 g
- Cms · compliance
- 1.15 mm/N
- Rms · mechanical resistance
- 0.81 kg/s
- Xmax · linear excursion
- 9.8 mm
- Vd · displacement
- Not listed in reviewed source
Published manufacturer reference values, not measurements of your individual driver. Open exact-model datasheet ↗
OEM procurement & sources
PURIFI OEM catalogue listing; sold in bulk containers by manufacturer enquiry. Confirm minimum order, specifications, exact revision and lead time with PURIFI. This is not a retail stock listing.
Official PURIFI OEM catalogue ↗
OEM variant listed by PURIFI, supplied in bulk through manufacturer enquiry. Specifications are reference values for this exact model; do not substitute the similarly named retail variant. CAD files and PDF datasheets remain external manufacturer resources.
Use the manufacturer’s exact model and latest revision before fabrication or design. Dimensions are published reference values; no complete CAD geometry or machining tolerance is certified here.